37000 Feet | Browse and search NASA's Aviation Safety Reporting System |
|
Attributes | |
ACN | 1270777 |
Time | |
Date | 201506 |
Local Time Of Day | 1201-1800 |
Place | |
Locale Reference | ZZZ.ARTCC |
State Reference | US |
Environment | |
Flight Conditions | VMC |
Light | Daylight |
Aircraft 1 | |
Make Model Name | MD-80 Series (DC-9-80) Undifferentiated or Other Model |
Operating Under FAR Part | Part 121 |
Flight Phase | Cruise |
Flight Plan | IFR |
Component | |
Aircraft Component | Pressurization Control System |
Person 1 | |
Function | Captain Pilot Flying |
Qualification | Flight Crew Air Transport Pilot (ATP) |
Events | |
Anomaly | Aircraft Equipment Problem Less Severe |
Narrative:
Enroute cruise at FL320. Flow light started to flicker then became steady as we witnessed the cabin rate indication start to climb with corresponding cabin altitude rise. Cabin altitude started off on schedule and was indicating around 7000. Pilots took O2 masks down to easily access them and tested them again. Donned O2 masks. Decent was coordinated with ATC; as QRH was consulted and completed. Descents were initiated; coordinated with ATC to FL300; FL260; FL240; then finally 10000. Throughout initial descent; we had speed brakes extended and power high as to permit the greatest inflow of pressurization. Both auto 1 and auto 2 pressure controllers were attempted with same result. Outflow valve indicator was showing full closed; and I additionally overrode the auto control of the outflow valve and assured it was in fact fully closed. Once it became apparent that a high power speed brake extended descent was not sufficient as to allow the cabin to pressurize in such a way that we would be able to keep up or manage the rate of cabin climb to an acceptable level and coordinated 10000 feet with ATC. At this point we initiated a speed brake extended power at idle max decent to 10000 as to 'beat' the cabins rate of climb down to an acceptable cruising altitude. Flight attendant were contacted and briefed on the condition. No brace no evacuation no special handling was anticipated from the flight attendant perspective; and a time frame was given until a safe landing at our destination. Once we reached 10000; our emergency situation was no longer present; so we [notified] ATC. Passenger were advised over PA of the initial decent; as normal; with no indication of the emergency. From the passenger perspective; it was a normal time for this PA and there was no abnormal decent nor aircraft attitude from their perspective. The max cabin altitude reached was 9200 feet at the end of our decent to 10000. Attempted to contact dispatch/maintenance control via airinc 4x but was unsuccessful. We called in range to the station and gave them a heads up about our situation and briefed them to contact maintenance control/dispatch to give them the info. Normal decent approach and landing was accomplished without further incident.
Original NASA ASRS Text
Title: The flight crew reported that they were unable to control the cabin pressurization. Several lower altitudes were requested from ATC until the aircraft leveled at 10;000 feet. The cabin altitude never exceeded 9;200 feet and a normal approach and landing was accomplished.
Narrative: Enroute cruise at FL320. Flow light started to flicker then became steady as we witnessed the cabin rate indication start to climb with corresponding cabin altitude rise. Cabin altitude started off on schedule and was indicating around 7000. Pilots took O2 masks down to easily access them and tested them again. Donned O2 masks. Decent was coordinated with ATC; as QRH was consulted and completed. Descents were initiated; coordinated with ATC to FL300; FL260; FL240; then finally 10000. Throughout initial descent; we had speed brakes extended and power high as to permit the greatest inflow of pressurization. Both auto 1 and auto 2 pressure controllers were attempted with same result. Outflow valve indicator was showing full closed; and I additionally overrode the auto control of the outflow valve and assured it was in fact fully closed. Once it became apparent that a high power speed brake extended descent was not sufficient as to allow the cabin to pressurize in such a way that we would be able to keep up or manage the rate of cabin climb to an acceptable level and coordinated 10000 feet with ATC. At this point we initiated a speed brake extended power at idle max decent to 10000 as to 'beat' the cabins rate of climb down to an acceptable cruising altitude. FA were contacted and briefed on the condition. No brace no evacuation no special handling was anticipated from the FA perspective; and a time frame was given until a safe landing at our destination. Once we reached 10000; our emergency situation was no longer present; so we [notified] ATC. PAX were advised over PA of the initial decent; as normal; with no indication of the emergency. From the PAX perspective; it was a normal time for this PA and there was no abnormal decent nor aircraft attitude from their perspective. The max cabin altitude reached was 9200 feet at the end of our decent to 10000. Attempted to contact dispatch/maintenance control via AIRINC 4x but was unsuccessful. We called in range to the station and gave them a heads up about our situation and briefed them to contact maintenance control/dispatch to give them the info. Normal decent approach and landing was accomplished without further incident.
Data retrieved from NASA's ASRS site and automatically converted to unabbreviated mixed upper/lowercase text. This report is for informational purposes with no guarantee of accuracy. See NASA's ASRS site for official report.