37000 Feet | Browse and search NASA's Aviation Safety Reporting System |
|
Attributes | |
ACN | 1314803 |
Time | |
Date | 201512 |
Local Time Of Day | 1201-1800 |
Place | |
Locale Reference | ZZZ.Airport |
State Reference | US |
Environment | |
Flight Conditions | VMC |
Light | Daylight |
Aircraft 1 | |
Make Model Name | EMB ERJ 170/175 ER/LR |
Operating Under FAR Part | Part 121 |
Flight Phase | Parked |
Flight Plan | IFR |
Component | |
Aircraft Component | APU |
Person 1 | |
Function | Pilot Flying Captain |
Qualification | Flight Crew Air Transport Pilot (ATP) |
Person 2 | |
Function | First Officer Pilot Not Flying |
Qualification | Flight Crew Air Transport Pilot (ATP) |
Events | |
Anomaly | Aircraft Equipment Problem Less Severe Flight Deck / Cabin / Aircraft Event Smoke / Fire / Fumes / Odor |
Narrative:
Just after calling for push back from gate we lost AC power to the aircraft (similar to what happens when gpu is inadvertently pulled without any other power source). We were on battery power alone at this point; however the APU was still running. We did not see any messages that directed us to any specific problem; just the messages that are generated when AC power is lost. Since we did not have power I opened up the cockpit door to establish direct communication with the cabin crew. Since we were on dc power only and communications were limited I quickly called dispatch from my cellphone and gave a brief description of the events; but told them that I was too busy to speak with them; but please notify ZZZ operations; mx control and ZZZ emergency services. As first officer and I were attempting to diagnose this non-annunciated problem; flight attendant indicated to me that smoke was filling the cabin at a rapid pace; coming from the vents; and most severe in the rear of the aircraft. I instructed first officer on communication 2 to contact operations and have them immediately reconnect the jet bridge. Suspecting that this smoke source was the APU itself (APU gen had kicked offline also) and recognizing the need for immediate and decisive action to a problem that was not exactly clear I decided to press the APU fire extinguisher button; and instructed flight attendant to open the front doors to get fresh air in to the cabin. First officer was having some difficulty getting operations to get the jet bridge back so while this door was open I was shouting to ground personnel to reconnect the bridge immediately. I then started walking through the cabin to check that all the passengers were ok and found that they were ok; but just a bit startled; with 2 passengers in the very rear requesting fresh air. I walked to the very rear of the cabin and asked flight attendant to describe what she saw. She indicated that the smoke was coming from an unspecific source in the very back of the plane; and none of the smoke was from the rear lav. Furthering my suspicion that the smoke source was in fact the APU I instructed flight attendant to open the rear doors to bring fresh breathable air in to the cabin. I brought the 2 passengers who had complained of the smoke to the very front of the plane to provide access to the fresh air from the front open doors; and the cross breeze that resulted from 1LR and now 2LR being opened mostly just about completely cleared the cabin of smoke. I once again walked through the cabin and checked with each passenger to make sure they were all ok; at the same time trying to downplay the situation with them so they would remain as calm as possible; just indicating that it was a minor mechanical malfunction; and we would have them off the airplane very soon. At first I was considering conducting an emergency evacuation because of the slow response of the ground crew bringing the jet bridge back; but then elected otherwise due to the fact that the situation now seemed stabilized; and the emergency evacuation would only introduce new unnecessary risk. The jet bridge was now being connected as we were able to take all passengers off safely. I told them that it was unlikely that we would be using this a/C to take them to [destination]; but customer service would soon re-accommodate them. As each passenger got off I once again checked to make sure they were ok; and apologized for the inconvenience. After all the passengers were off I went down to the ramp to get a better look at the rear of the aircraft. There were no obvious signs of damage or malfunction; but at this time the port authority had arrived. The port authority FD did a thorough inspection on the aircraft inside and outside; and indicated that if there was a fire at any point; it was no longer any issue. We then waited for mx personnel to arrive to begin diagnosing the problemmechanical problems are difficult to prevent; discussion of this scenario with all crew members in case of future occurrence. There was not a clear checklist to follow; wasmore of a case of needing to take immediate action to prevent a problem from escalating.
Original NASA ASRS Text
Title: ERJ-170 flight crew reported the cabin began filling with smoke while at the gate awaiting push back. Crew shut down the APU and passengers exited the aircraft through the jetway.
Narrative: Just after calling for push back from gate we lost AC power to the aircraft (similar to what happens when GPU is inadvertently pulled without any other power source). We were on battery power alone at this point; however the APU was still running. We did not see any messages that directed us to any specific problem; just the messages that are generated when AC power is lost. Since we did not have power I opened up the cockpit door to establish direct communication with the cabin crew. Since we were on DC power only and communications were limited I quickly called dispatch from my cellphone and gave a brief description of the events; but told them that I was too busy to speak with them; but please notify ZZZ operations; MX control and ZZZ emergency services. As FO and I were attempting to diagnose this non-annunciated problem; FA indicated to me that smoke was filling the cabin at a rapid pace; coming from the vents; and most severe in the rear of the aircraft. I instructed FO on COM 2 to contact operations and have them immediately reconnect the jet bridge. Suspecting that this smoke source was the APU itself (APU gen had kicked offline also) and recognizing the need for immediate and decisive action to a problem that was not exactly clear I decided to press the APU fire extinguisher button; and instructed FA to open the front doors to get fresh air in to the cabin. FO was having some difficulty getting operations to get the jet bridge back so while this door was open I was shouting to ground personnel to reconnect the bridge immediately. I then started walking through the cabin to check that all the passengers were OK and found that they were OK; but just a bit startled; with 2 passengers in the very rear requesting fresh air. I walked to the very rear of the cabin and asked FA to describe what she saw. She indicated that the smoke was coming from an unspecific source in the very back of the plane; and none of the smoke was from the rear LAV. Furthering my suspicion that the smoke source was in fact the APU I instructed FA to open the rear doors to bring fresh breathable air in to the cabin. I brought the 2 passengers who had complained of the smoke to the very front of the plane to provide access to the fresh air from the front open doors; and the cross breeze that resulted from 1LR and now 2LR being opened mostly just about completely cleared the cabin of smoke. I once again walked through the cabin and checked with each passenger to make sure they were all OK; at the same time trying to downplay the situation with them so they would remain as calm as possible; just indicating that it was a minor mechanical malfunction; and we would have them off the airplane very soon. At first I was considering conducting an emergency evacuation because of the slow response of the ground crew bringing the jet bridge back; but then elected otherwise due to the fact that the situation now seemed stabilized; and the emergency evacuation would only introduce new unnecessary risk. The jet bridge was now being connected as we were able to take all passengers off safely. I told them that it was unlikely that we would be using this A/C to take them to [destination]; but customer service would soon re-accommodate them. As each passenger got off I once again checked to make sure they were OK; and apologized for the inconvenience. After all the passengers were off I went down to the ramp to get a better look at the rear of the aircraft. There were no obvious signs of damage or malfunction; but at this time the Port Authority had arrived. The Port Authority FD did a thorough inspection on the aircraft inside and outside; and indicated that if there was a fire at any point; it was no longer any issue. We then waited for MX personnel to arrive to begin diagnosing the problemMechanical problems are difficult to prevent; discussion of this scenario with all crew members in case of future occurrence. There was not a clear checklist to follow; wasmore of a case of needing to take immediate action to prevent a problem from escalating.
Data retrieved from NASA's ASRS site and automatically converted to unabbreviated mixed upper/lowercase text. This report is for informational purposes with no guarantee of accuracy. See NASA's ASRS site for official report.