37000 Feet | Browse and search NASA's Aviation Safety Reporting System |
|
Attributes | |
ACN | 1580974 |
Time | |
Date | 201809 |
Local Time Of Day | 1801-2400 |
Place | |
Locale Reference | ZZZ.Airport |
State Reference | US |
Environment | |
Flight Conditions | Marginal |
Light | Daylight |
Aircraft 1 | |
Make Model Name | PC-12 |
Operating Under FAR Part | Part 135 |
Flight Phase | Climb |
Route In Use | Vectors |
Flight Plan | IFR |
Component | |
Aircraft Component | Elevator Trim System |
Person 1 | |
Function | Captain Pilot Flying |
Qualification | Flight Crew Commercial |
Events | |
Anomaly | Aircraft Equipment Problem Critical |
Narrative:
We departed out of ZZZ with a [part] 135 flight carrying two passengers. We were cleared to take off of runway xx; assigned runway heading to 2000 feet. Just as I (pilot flying) was leveling at 2000 [feet]; the aural warning for 'pitch trim runaway' sounded; with a red cas message confirming. I instructed my pilot monitoring to hit the trim interrupt switch as I controlled the plane and brought back the power. At this point; the trim was about 2/3 nose down. I told pilot monitoring to instruct ATC that we would need vectors back to ZZZ and that we were not declaring an emergency; but had a mechanical malfunction. We were asked if we wanted runway xy; as it was closer; but I said no; as there would be a tailwind. We were instructed to expect vectors for runway xz; with hopes of a visual. Pilot monitoring then asked for the QRH; and once I got the plane more stabilized; I asked if he would be comfortable taking the flight controls so I could run the QRH. I slowed down in order to reduce control forces; and then handed over flight controls; with positive exchange of both those and radios. I read through the QRH once; and then started the actual physical checklist. I can't say for sure; but I believe during the portion of the QRH (step 3) when trim interrupt is set back to normal; the rest of the trim ran away (aural warning and cas again) before I was able to repress interrupt (pitch trim circuit breaker [circuit breaker] pulled; alternate pitch trim circuit breaker in). The plane was now fully trimmed nose down. At the end of the checklist; we had another positive exchange of flight controls; and to slow us down even more I opted for flaps 30 and gear down. We got vectors for the RNAV xz; as the visibility and ceiling were not conducive for a visual at that end of the runway. The wind was 170 at around 10 knots; and gusting around 20 (I considered flaps 40 but decided not to for the wind). We picked up the runway about 4 miles out and followed the lpv to land. After landing; we were asked if we needed further assistance; which we declined. Had my reaction time to the second trim interrupt been faster; I might have been able to catch the trim before it was fully nose down. There were no previous indications throughout the week of a trim issue; so it was a surprise to hear the aural warning on climb out; a busy time as it is.
Original NASA ASRS Text
Title: PC12 Captain reported a pitch trim runaway during climb resulted in a return to the departure airport.
Narrative: We departed out of ZZZ with a [Part] 135 flight carrying two passengers. We were cleared to take off of Runway XX; assigned runway heading to 2000 feet. Just as I (Pilot Flying) was leveling at 2000 [feet]; the aural warning for 'pitch trim runaway' sounded; with a red CAS message confirming. I instructed my Pilot Monitoring to hit the trim interrupt switch as I controlled the plane and brought back the power. At this point; the trim was about 2/3 nose down. I told Pilot Monitoring to instruct ATC that we would need vectors back to ZZZ and that we were not declaring an emergency; but had a mechanical malfunction. We were asked if we wanted Runway XY; as it was closer; but I said no; as there would be a tailwind. We were instructed to expect vectors for Runway XZ; with hopes of a visual. Pilot Monitoring then asked for the QRH; and once I got the plane more stabilized; I asked if he would be comfortable taking the flight controls so I could run the QRH. I slowed down in order to reduce control forces; and then handed over flight controls; with positive exchange of both those and radios. I read through the QRH once; and then started the actual physical checklist. I can't say for sure; but I believe during the portion of the QRH (step 3) when trim interrupt is set back to normal; the rest of the trim ran away (aural warning and CAS again) before I was able to repress interrupt (pitch trim CB [circuit breaker] pulled; alternate pitch trim CB in). The plane was now fully trimmed nose down. At the end of the checklist; we had another positive exchange of flight controls; and to slow us down even more I opted for flaps 30 and gear down. We got vectors for the RNAV XZ; as the visibility and ceiling were not conducive for a visual at that end of the runway. The wind was 170 at around 10 knots; and gusting around 20 (I considered flaps 40 but decided not to for the wind). We picked up the runway about 4 miles out and followed the LPV to land. After landing; we were asked if we needed further assistance; which we declined. Had my reaction time to the second trim interrupt been faster; I might have been able to catch the trim before it was fully nose down. There were no previous indications throughout the week of a trim issue; so it was a surprise to hear the aural warning on climb out; a busy time as it is.
Data retrieved from NASA's ASRS site and automatically converted to unabbreviated mixed upper/lowercase text. This report is for informational purposes with no guarantee of accuracy. See NASA's ASRS site for official report.