Narrative:

On departure from runway 24 at teb I had failed to set the initial altitude in the altitude selector at 1500 ft. Instead I had 2000 ft selected. Upon passing 1000 ft I realized the mistake and reselected the altitude selector to 1500 ft. Apparently that didn't give the autopilot system time to recognize the change and as a result 1500 ft was not captured. Upon passing 1600 ft I disconnected the autopilot and manually descended the aircraft back to 1500 ft but only after reaching an altitude of 1800 ft before that could occur.

Google
 

Original NASA ASRS Text

Title: A Premier 1 pilot reported climbing through charted altitude on the TEB departure because he set his altitude selector to 2000 FT instead of 1500 FT.

Narrative: On departure from Runway 24 at TEB I had failed to set the initial altitude in the altitude selector at 1500 FT. Instead I had 2000 FT selected. Upon passing 1000 FT I realized the mistake and reselected the altitude selector to 1500 FT. Apparently that didn't give the autopilot system time to recognize the change and as a result 1500 FT was not captured. Upon passing 1600 FT I disconnected the autopilot and manually descended the aircraft back to 1500 FT but only after reaching an altitude of 1800 FT before that could occur.

Data retrieved from NASA's ASRS site as of April 2012 and automatically converted to unabbreviated mixed upper/lowercase text. This report is for informational purposes with no guarantee of accuracy. See NASA's ASRS site for official report.