37000 Feet | Browse and search NASA's Aviation Safety Reporting System |
|
Attributes | |
ACN | 730879 |
Time | |
Date | 200703 |
Local Time Of Day | 0601 To 1200 |
Place | |
Locale Reference | airport : las.airport |
State Reference | NV |
Altitude | msl single value : 11000 |
Environment | |
Flight Conditions | VMC |
Light | Dawn |
Aircraft 1 | |
Controlling Facilities | tracon : l30.tracon |
Operator | general aviation : corporate |
Make Model Name | Citation I/SP |
Operating Under FAR Part | Part 91 |
Flight Phase | climbout : intermediate altitude |
Route In Use | departure sid : zzz |
Flight Plan | IFR |
Person 1 | |
Affiliation | company : corporate |
Function | flight crew : single pilot |
Qualification | pilot : multi engine pilot : atp pilot : cfi |
Experience | flight time last 90 days : 43 flight time total : 6735 flight time type : 3000 |
ASRS Report | 730879 |
Person 2 | |
Affiliation | government : faa |
Function | controller : departure |
Events | |
Anomaly | altitude deviation : overshoot non adherence : clearance non adherence : published procedure |
Independent Detector | other controllera |
Resolutory Action | none taken : detected after the fact |
Supplementary | |
Problem Areas | Aircraft Flight Crew Human Performance |
Primary Problem | Flight Crew Human Performance |
Air Traffic Incident | Pilot Deviation |
Narrative:
I was climbing after takeoff to assigned altitude of 7000 ft. Departure control cleared me to FL190. He then gave me a change to stop at 10000 ft. I had originally set '70' in the altitude select window but changed it to '100.' what I didn't notice was the vn-212 altitude controller switch was pointed at the 'stael' instead of 'altitude.' this is very hard to see and I did not notice it had been moved. Therefore; the autoplt did not level at 10000 ft.
Original NASA ASRS Text
Title: C501 PLT EXPERIENCES ALT DEV WHEN THE VNAV SELECTOR IS IN THE STATION ELEVATION MODE VICE ALT.
Narrative: I WAS CLBING AFTER TKOF TO ASSIGNED ALT OF 7000 FT. DEP CTL CLRED ME TO FL190. HE THEN GAVE ME A CHANGE TO STOP AT 10000 FT. I HAD ORIGINALLY SET '70' IN THE ALT SELECT WINDOW BUT CHANGED IT TO '100.' WHAT I DIDN'T NOTICE WAS THE VN-212 ALT CONTROLLER SWITCH WAS POINTED AT THE 'STAEL' INSTEAD OF 'ALT.' THIS IS VERY HARD TO SEE AND I DID NOT NOTICE IT HAD BEEN MOVED. THEREFORE; THE AUTOPLT DID NOT LEVEL AT 10000 FT.
Data retrieved from NASA's ASRS site as of January 2009 and automatically converted to unabbreviated mixed upper/lowercase text. This report is for informational purposes with no guarantee of accuracy. See NASA's ASRS site for official report.